;) ;) ;) ;) ;) |
;) ;) |
Price $3500/OBO or will trade with a motorcycle or scooter.
I'm located in Tulsa Ok.
Calm water-------------28 knots
Verticle hard structure
clearance 8"
maximum condinuous gradient slope 1:8
maximum operating sea state force 3 beaufort
Dimentions:
Length 12' 9"
Beam 7' 4"
Height 4'
BAGS NEEDS TO REALIGN TO MAKE IT WORK.
weights:
Empty 400# to 450#
usefull 300# to 350#
maximum all up wight 900#
Engine:
Kawasaki 2 Cycle 2 Cylinder, 436 CC
Maximum H.P. 38
Maximum R.P.M. 6500 R.P.M.
Ignition- Breaker Type, Flywheel Magneto
Ignition Timing- 5 static/25 at 6000 Rpm (BTDC 0.073 in.*1.86mm.))
Recoil Starter-(optional electric start)
Fuel/Oil mix- fuel and 2 cycle oil (89octane number or better)
25:1-6 gallons gas to 31 oz.oil
Spark plugs- NGK bz8es- gap 0.024 in. (0.6mm)
Cooling- Axial Fan
Fuel Tank Capacity - 6 Gallons
Maximum Prop Shaft speed- 28-- R.P.M.
I DO NOT TAKE MONEY THAT IS OUT OF USA. IF YOU PAY BY MONEY ORDER,CASHIER CHECK OR CHECK YOU HAVE TO WAIT 14 BUSINESS DAY UNTIL THE CHECK IS CLEAR.
;) ;) ;) ;) ;) |
;) ;) ;) ;) ;) |
;) |
Particulars
-Currently working in British Columbia,
Canada
-Transport Canada approved
-Canadian and USA registry
(Commercial)
-Transportable (includes trailer)
-Fully equipped and ready for work
-New replacement cost $600,000.00 CDN
+
-Selling Price : $185,000.00 Cdn. plus trailer and
equipment
Technical
Specifications
Length - 28 feet
Beam - 15 feet 8
inches
Payload - 2000 lbs
Unladen wt. - 4000
lbs
Engine - Deutz air cooled, direct
injection, turbo charged diesel (190 h.p. / 2500 rpm)
Fuel Consumption - 9 to 15 litters
per hour (normal cruise)
Fuel / Ballast System - 3 tanks,
50/6/40 gal.
Skirt Shift System - Chevron type
(electrically operated)
Maximum Recommended Speed - 35
knots
Hull Material - Marine grade
aluminum
Skirt - Loop and
segment
Lift Fan - .835 (aluminum )
Centrifugal Reverse Incline
Propeller - 54 inch 4 blade wood
laminate with 2 layers of Kevlar and Epoxy
Cabin
The cabin is equipped with 2 bucket seats separated
from the passenger/cargo bay by a soft hatch
and a hard hatch which is removable from the
craft.(used for security ) The passenger/cargo bay is
equipped with 2 removable bench seats covered by a
4 position, also removable, soft top overhead.
Trailer
Factory made to fit the 1000TD, this 10,000 lb.
capacity tandem axle comes with hydraulic deck and
folding sides.
This craft has a total of 2200 hrs, less
than 200 hrs on the hull refit, propeller, engine and all fire
suppression and safety equipment. The skirt loop is
in good condition and all 112 regular segments
and chip bags are less than 50 hrs. The engine and
engine bay can be changed to accommodate
winter or summer temperatures in minutes. Also
equipped with approved life jackets and a 15 man
DBC life raft.
This is a very stable and reliable craft with
numerous upgrades and extras. Because of its open
top cargo bay this makes it a very versatile
craft.
Would also consider partnership with U.S.
or Foreign organization for the purpose of year
round operation.
Will be receptive to your
ideas.
EMail
tlhomes@shaw.ca Shelter for craft and trailer available.
E-mail hopkinsr@nbnet.nb.ca
I have a NEW Kohler CV25s vertical shaft Engine For sale. The shaft is 4 X 1 1/4 inches. I was going to build a sevtec surveyor but personal problems got in the way and I no longer have any use for this fine Engine. I Live in Olympia Washington. I will deliver the engine anywhere in Washington Oregon or Idaho To save you shipping cost if you Buy at the full price. The engine will half to be shipped buy truck since it weighs over 100# I will send a picture if you need one but This engine is in New condition and has never been run.
I can be contacted as follows. kiltoff60@juno.com Please put the word Engine in your E mail subject line so I don't delete it along with the junk.
-Completed hull
-Rudders (not glassed)
-18 HP B&S engine with all hardware
-Skirt material
-All metal items (skids completed)
-Aircraft fabric
-Foam to complete fan shroud
-Steering cable and control cable
Price: $4,500 as package
Location: Snohomish, WA
Contact: Kelly Hauge (425) 931-3435
;) ;) ;) ;) ;) |
A brand new just finished kit of a 13 p universail hovercraft, This unit was finished and test flown April 2005, it has a 25 hp. Kohler 4 cycle engine, this unit has a unique feature that no other single engine craft has, you can engauge and disengauge rear prop from a switch in cockpit on dash.It also has a new fly on and fly off trailer. I have more pictures and videos e- mail me, bobolink28@highstream.net
hovercraft in morris il,
60 miles s. w. of chicago
COMPLETE ENGINE EXHAUST & GEAR BOX With New 6 Blade prop
All Guages with panel & wires
60 Hours Total on hr meter
Ran good when pulled from craft.
All you need is a Battery and fuel tank hook up wires.
$1750.00 Plus shipping costs.
Contact: rqadg@cs.com
;) ;) ;) ;) |
this has been on Tv in many news shows & thru "Burger King" drive thru . 60HP - 4 haligen
light bar- seats 2 on mid cusion or removable mid seat for 3 - has tilt & swivel "fly on &
off" trailer. Asking $2,700 ------ my home # is 650-340-6332
;) ;) ;) ;) ;) |
;) ;) ;) ;) ;) |
- 582 Rotax
- Oil Injected
- Dual Carbs
- 36 Inch Duct
- Full Floatation Kit
- Dual Batteries
- Siren
- PA System
- Spotlight
- Lightbar
- Tach
- Gauges
- Backup Rope Start
- Bilge pump
- Has optional Stretcher Assembly
- Exactly same craft as machine on Scats Website
- Like new condition
- Has some additional upgrades
New, this macine is approx. 25,000.
asking 14,000 negotiable WITH TRAILER!
This craft is not a toy, High Performance to say the least. Ideal for a fire dept in northern climates as it was built for ice rescue, recovery work. Craft is red. Every light/siren works. Runs great. Been stored inside. Looks like new. For more info call me at 518 727 2512 cell, or home at 518 747 5623. You pick up, will not ship.
;) ;) ;) |
;) |
For more info., please call me toll free anytime at 800-677-5778
;) ;) |
12 feet long, carries 3 people, 20 hours, good shape, all new skirt segments, currently registered in Arizona. , brand new passenger seats, includes SCAT book. Comes with brand new 2004 trailer. Very fun to fly. runs very well, electric start with full instrument cluster. must sell. Comes with brand new OEM gas tank, passanger seats, battery and trailer. The trailer alone cost me $2000.00
$4800.00 OBO
* Can help arrange shipping.
More pictures can be seen here:
http://www.tempemusic.com/hovercraft
;) ;) ;) ;) ;) |
Carbon fiber and Kevlar hull, chrome molly frames, Light weight and VERY FAST!
Rotax 583 Thrust 86 HP
Hirth F33 Lift
Craft used in the filming of the movie "From Justin to Kelly"
Located in south TX.
Also comes with fly on tilt and turn trailer in great shape also.
This hovercraft is in great condition with no mechanical problems "Ready to Ride"
It has been clocked at 65mph with a little more throttle to go. SERIOUS inquiries can contact me by phone for any other questions
Contact Mark Edwards at 361-816-9999
Will sell for what we paid, customer pays Shipping.
We have over 11,000US into it. We would sell it for 10,000US. We have all reciepts for costs of unit, shipping, duty etc...
OffshoreMotorsports
1123 Lorne
Sudbury, ON
705-674-2262
;) ;) ;) ;) ;) |
;) |
Please contact:
Dave Sharma
Ph: (604) 817 2250
Rotax 503
Dual Carbs
Electric start
Like new condition
Seats 3
Virtually same craft as new Scat Liberator
Only red in color
Craft has been stored inside
Has 7 hours on craft
Practically brand new!
Lost interest in craft
New today, this craft is 18,000 asking 9,500 negotiable
Will not ship.
I have some extra skirt segments, ones on craft are like new
Contact dave at ifastquad@hotmail.com or 518 222 5076
;) ;) ;) ;) ;) |
;) ;) ;) ;) ;) |
;) ;) ;) ;) |
Possible to take a test drive with MAD in Slovenia, EU
Send your offer for MAD on hovercraft.slo@email.si or call 00-386-41-633-656 - Ales Muha
Slovenia
;) ;) ;) ;) ;) |
;) ;) |
;) |
Yamaha 60 hp GT 2 stroke engine very powerful and fast Make and Model-Hovertechnics Hoverjet GT 10’ 6” long 6’ wide Seats 2 maybe 3 Nav lights w/ rotating yellow warning light on top Includes training video and promotional video All manuals complete w/ cd rom walk through of maintenance Extra rubber skirts included and extra parts included
Craft resides in Southern California but delivery to almost anywhere in the US is free.
Email me- josephricheson@hotmail.com Call me with an offer at- (619) 379-4034 ask for Joseph
side mounted tuned exhaust for Rotax 503 $100.00usd
type B gear box and blades $250.00usd
7 gallon fuel tank $20.00usd
side by side bench seat $30.00usd
full set of finger skirts $100.00usd
trigger throttle unit $15.00usd
fiberglass hovercraft body $300.00usd
All parts are in good condition if you would like to ask any questions or would like pictures please e-mail me at stag61@hotmail.com
;) ;) ;) ;) ;) |
;) ;) ;) ;) |
The construction method is wooden rib and stringer, the craft measures 16 feet in length by 7 feet wide. The trust of the craft is a two-blade propeller that measures 4 feet in diameter and is powered by a 5-30 artic cat liquid cool engine. The lift propeller is a four bladed fan powered by 8 HP Tecumseh. The craft includes a spare propeller, a four bladed fan and a custom-built tilt bed trailer, which measures a 7 feet by 14 feet. This hovercraft is running and ready to go but needs a few finishing touches.
The asking price is $6,500.00 Canadian.
For more information, please contact Des at: (780)-778-3644 or dryfest@telus.net
;) ;) ;) ;) ;) |
Basket case needs lots of tlc
Has set outside way too long
engines overhauled a few years ago probably less than 5 hours tt since recent storm damage as a load of irrigation pipe blue into it
cowling for seat and seat missing
cowling on other side damaged
2 canadian curtiss wright limited 2 cylinder engines
some damage to pusher fan shroud
exter fan shrou included
2 spare engines included
prop in operatable
2 blade new prop never installed
sits on custom made tilt trailor
;) |
Restored to factory specs..ALL NEW seals /bearings /push /pull cables/etc.
NEW engine 1600cc 54 HP /10 hours on engine and running gear.
Reworked rear drive for higher output and better reliability
New speed 45 MPH /NEW Lift 14in.
Tilt Trailer
More Info&Pictures at this URL--- http://www.thehitworks.com/HOVER.htm
$3500 with fly on tilt trailer and $3000 without.
Located 30 Miles east of Seattle... in the state of Washington.
ema
;) ;) |
Contact:
Branko Pintarich,
Studio Pu-Pir d.n.o.
1000 Ljubljana
Slovenia
Europe
Tel.: + 386 1 510 21 10
Fax.:+ 386 1 510 21 15
;) ;) |
Can be modified to hold up to 8 passengers
Aluminum construction
Front lift: 503 Rotex engine
Forward Propulsion: V-6 ford engine (slightly over powered) At half throttle we were clocked at over 100mph
Does float. Built with the intension of offering tours on Lac LaRonge.
Heavy Duty Trailer Included
Over $30,000.00 invested into it’s making.
Does need some cosmetic fix ups & a new rear prop.
PRICE $15,000.00 OBO
Located in Saskatoon Saskatchewan
To Find out more call:
Richard @ 306-384-4490
;) ;) ;) ;) ;) |
;) |
I'm living near Montreal (Québec, Canada). Price : 600 US$ + shipping
Jean
Oka, Québec, Canada
Tél : (450) 479-1298
Craft - 10' x 6'
Gas tank - 6 gals.
Run time at full throttle - 2 hours
Lift load - 350 lbs.
Duct size - 32 " 6 blades
All deck hardware is Stainless Steel
Motor - Rotax 503 54HP at 6200 RPMs with elec.
Seating - 2 person inline or 350Lbs.
Top speed - around 45 MPH with one person weighting 100-190lbs
Full lighting US Coast Guard approved lighting package
Full gauge package (rpm, volts, hour, compass)
All US Coast Guard safety equipment.
$9000
HoverCrafts Of Texas
Lane Crampton
281-288-8323
www.hovercraftsoftexas.com